یکی از روشهای بررسی زمینلرزهها با استفاده از شتابنگاشت، شبیهسازی جنبش نیرومند زمین است. شبیهسازی جنبش نیرومند زمین بهویژه برای مناطقی که از آن دادهای در دسترس نیست، نقش مهمی در برآورد پارامترهای جنبش نیرومند زمین ایفا میکند. در این تحقیق، پارامترهای گسل مسبب زمینلرزه 20 دسامبر 2010 ریگان با بزرگی 7/6 = MW(USGS) که در 23 ایستگاه شتابنگاری سازمان تحقیقات ساختمان و مسکن ثبت شده است با شبیهسازی جنبش نیرومند زمین به روش کاتورهای گسل محدود تعیین میشود. اساس روش کاتورهای بر این است که میتوان مدلهای عرضه شده برای طیف دامنه حرکات زمین را با توجه به تصادفی بودن حرکات با بسامد زیادترکیب کرد. مدل گسل محدود ابزاری اساسی برای پیشبینی حرکات زمین در نزدیکی رومرکز زمینلرزههای مهم به شمار میرود. در روش گسل محدود، شبیهسازی حرکات تعدادی زمینلرزه کوچک ناشی از ریزگسلها که تشکیلدهنده یک گسل هستند، درحکم روشی برای پیشبینی حرکات در میدان نزدیک مطرح شده است. در این تحقیق با استفاده از شتابنگاشتهای زمینلرزه 20 دسامبر 2010 ریگان، پارامتر اُفت طیفی و رابطه وابستگی بسامدی ضریب کیفیت امواج بُرشی که از پارامترهای ورودی بهمنظور شبیهسازی جنبش نیرومند زمین بهروش کاتورهای گسل محدود هستند، محاسبه شده است. با توجه به توزیع پسلرزهها و رابطه خودتشابهی، صفحه گسل مسبب زمینلرزه 20 دسامبر 2010 ریگان بهصورت 8 المان در راستای طول و 8 المان در راستای عرض در نظر گرفته شد. براساس نتایج بهدست آمده از این تحقیق، طول گسل در راستای امتداد 59/25 کیلومتر و عرض گسل در راستای شیب 19/11 کیلومتر تعیین شد. محل کانون زمینلرزه در المان (5,4) = (i,j) بهدست آمد. همچنین برای گسل مسبب زمینلرزه 20 دسامبر 2010 ریگان، مقدار بهینه امتداد 37 درجه و شیب 87 درجه برآورد و اُفت تنش 60 بار درنظرگرفته شد. براساس مقایسه نگاشتهای واقعی و شبیهسازی شده، مقدار بهدست آمده برای امتداد و شیب گسل در این تحقیق، همخوانی بسیار خوبی با نگاشتهای واقعی دارد.
One of the methods to study the earthquakes by using the recorded accelerations is to simulate the strong ground motion. The stochastic finite fault approach will aid in the development of ground-motion relations in data-poor regions. In this research, we identified the source parameters of the 20 December 2010 Rigan Earthquake using a ground-motion simulation based on a stochastic finite-fault model. The main shock of the 20 December 2010 Rigan Earthquake with magnitude MW = 6.7 (USGS), was recorded by 23 digital SSA-2 accelerograms. These stations were installed at epicentral distances ranging from 41 to 263 km. We estimated the causative rupture length and the downdip causative rupture width using the empirical relation from the best defined aftershock zone and the depth distribution of these aftershocks at 25.59 and 11.19 km, respectively. The fault plane was divided into 8×8 elements; it is based on the concept of self-similarity and revised scaling relations .The above method needs information related to attenuation, site characterization and frequency-dependent amplification as input, which are determined based on strong motion records, obtained during the main shock of 20 December 2010 Rigan Earthquake. In addition, the spectral decay parameter and the quality factor have been taken into account as other basic inputs for the mentioned method. The simulated results were compared with recorded ones on both frequency and time domains. The estimated strike and dip of the causative fault were 37 and 87, respectively. The rupture was propagated at (i,j) = (4,5) element, from Northeast to Southwest. The supposed stress drop was 60 bars. A quite satisfactory agreement was found between the simulated amplitude Fourier spectra and the recorded data at frequencies of engineering interest (0.5 to 20 Hz).