@article { author = {Emami, Reza and Rezapour, Mehdi}, title = {Local magnitude scale (ML) for central Alborz}, journal = {Iranian Journal of Geophysics}, volume = {6}, number = {3}, pages = {59-71}, year = {2012}, publisher = {Iranian Geophysical Society}, issn = {2008-0336}, eissn = {2783-168X}, doi = {}, abstract = {The availability of a large amount of the data recorded by the Iranian Seismic Telemetry Network (ISTN) has motivated this study to develop relations for the routine determination of ML scale for Central Alborz region of northern Iran. The ML is commonly used in engineering because it is determined within the frequency range (0.5-3 sec) of interest in most of such applications. For any comprehensive seismic hazard analysis, one needs a calibrated magnitude relationship as well as an earthquake catalog for the study region. It is a well-known fact that the regional geology has a great influence on magnitude relations. Therefore, for each seismic region a specific magnitude relation has to be developed. The ML scale is based on the arithmetic mean of horizontal components of the synthesized Wood–Anderson seismograms. We used both nonparametric and parametric methods for inversion. We used a large dataset of 3886 events including 62031 waveforms which recorded by Tehran, Semnan and Sari seismic networks during 02/03/1997 to 13/03/2011. These seismic networks comprise of 19 three-component stations. We calculated the associated synthesized Wood-Anderson seismogram for each SS-1 waveform which records the velocity. Based on Richter’s method, we used amplitudes which are arithmetic means of those of horizontal components. Richter’s ML formula first developed for southern California and Savage and Anderson introduced a nonparametric least-squares inversion method which has been used by others. In this method, the amplitudes recorded at arbitrary distances are linearly interpolated to yield values for the attenuation curve at some fixed distances. In this study, we used both methods. The resulting equations are -logA0 = 0.9819log(r / 100) + 0.0028(r - 100) + 3.0 and-logA0 = 1.076log(r) + 0.0029(r) + 0.5580 from parametric and non-parametric methods, respectively. Where r is hypocentral in kilometer and A0 is amplitude in millimeter. The two methods yielded very similar results. Unlike the parametric method, the nonparametric one does not impose any a priori assumption of the shape of the attenuation curve on the data and has the potential to detect hinges in the attenuation curve that are caused by structural boundaries such as Moho or geological variations affects on the attenuation curve. Thus the result obtained by nonparametric method was chosen as the final result. Bakun and Joyner (1984) give the following formula for the Q / f  ratio: taking an average S-wave crustal velocity of VS = 3.3 km/sec, the k value obtained by the non-parametric method, 0.0029, would imply a Q / f  ratio of 150 in Central Alborz, Iran.    }, keywords = {Local magnitude (ML),Central Alborz,parametric and non-parametric methods}, title_fa = {مقیاس بزرگی محلی (ML) برای البرز مرکزی}, abstract_fa = {مقیاس بزرگی محلی عمدتاً در محدوده بسامدی ( sec3-5/0) اندازه‌گیری می‌شود، از طرفی بسامد طبیعی اغلب سازه‌ها در حدود 1 ثانیه است. در نتیجه گستره خسارت چندان با این مقیاس مرتبط نیست، بنابراین به‌منظور تحلیل مخاطره و مانند آن، تعیین بزرگی محلی برای زلزله‌های رخ داده در هر منطقه مورد نیاز است. چون مقیاس بزرگی محلی بسیار متاثر از ساختار پوسته و زمین‌شناسی منطقه است بنابراین باید برای هر منطقه منحنی تضعیف امواج لرزه‌ای منتشر شده به‌دست آید. ما از دو روش پارامتری و ناپارامتری برای معکوس‌سازی و به‌دست آوردن ضرایب منحنی تضعیف استفاده کردیم. وجود داده زیاد ثبت شده در مرکز لرزه‌نگاری کشوری، ما را بر آن داشت تا مبادرت به تعیین منحنی تضعیف و مقیاس ML برای البرز مرکزی کنیم. در این تحقیق از حجم عظیمی از داده که شامل 62523 لرزه‌نگاشت مربوط به 3889 زلزله می‌شود، استفاده شده است. داده‌ها مربوط به زمین‌لرزه‌هایی است که در محدوده طول جغرافیایی o48 تا o55 درجه شرقی و عرض جغرافیایی o34 تا o38 درجه شمالی در بازه زمانی 02/03/1997 تا 13/03/2011 رخ داده و در شبکه‌‌های لرزه‌نگاری تهران، سمنان و ساری ثبت شده‌اند. در این تحقیق برای هر شکل‌موج ثبت شده در لرزه‌سنج SS-1 که سرعت‌نگار است لرزه‌نگاشت ساختگی دستگاه وود-اندرسون تعیین و اطلاعات لازم از جمله بیشینه دامنه استخراج شده است. لازم به ذکر است دامنه‌های استخراج شده براساس روش اولیه ریشتر، یعنی بیشینه دامنه از خط مبنا تا پیک مولفه‌های افقی در گروه S و میانگین حسابی آنها برای به‌دست آوردن مقادیر واسنجی (کالیبراسیون) مورد استفاده قرار گرفت. تابع‌های تصحیح تجربی به‌دست آمده از روش‌های پارامتری و ناپارامتری به‌ترتیب عبارت‌اند از: -logA0=0.9819log(r/100)+0.0028(r-100)+3.0 -logA0=1.076log(r)+0.0029(r)+0.5580 که r فاصله کانونی برحسب کیلومتر و A0 دامنه برحسب میلی‌متر است. منحنی تضعیف به‌دست آمده در این تحقیق نشان می‌دهد که تضعیف امواج لرزه‌ای در البرز مرکزی نسبت به ناحیه کالیفرنیا بیشتر است. مقدار Q با توجه به مقدار 0029/ 0k = به‌دست آمده در روش ناپارامتری و استفاده از فرمول باکن و جوینز (1984) و فرض VS= 3.3 km/sec، برای تناوب یک ثانیه حدود 150 به‌دست آمد. تغییرات زمین‌ساختی پوسته منطقه بعد از پرکامبرین و فعالیت‌های آتشفشانی در منطقه را می‌توان از عوامل اصلی کم بودن مقدار Q برشمرد. تصحیحات ایستگاهی به‌دست آمده نشان می‌دهد که ایستگاه انجیلو (ANJ) از شبکه لرزه‌نگاری سمنان و ایستگاه پرن (PRN) از شبکه لرزه‌نگاری ساری به‌ترتیب دارای تصحیحات ایستگاهی 725/0 و 378/0- واحد بزرگی هستند.  }, keywords_fa = {بزرگی محلی (ML),البرز مرکزی,روش­های پارامتری و ناپارامتری}, url = {https://www.ijgeophysics.ir/article_40652.html}, eprint = {https://www.ijgeophysics.ir/article_40652_73c81893bfae11997709c28986042978.pdf} }