@article { author = {Esmaeili, Sameddin and Gholami, Ali and Siahkoohi, Hamid Reza}, title = {Errors due to undetectable displacements of receiver and source; a challenge for processing mountainous seismic data}, journal = {Iranian Journal of Geophysics}, volume = {16}, number = {3}, pages = {199-222}, year = {2022}, publisher = {Iranian Geophysical Society}, issn = {2008-0336}, eissn = {2783-168X}, doi = {10.30499/ijg.2022.332159.1406}, abstract = {A determinant factor in generating qualified seismic images of subsurface layers is the coherency of reflection events in pre-stack seismic data. Accordingly, this level of coherency could be reduced due to the complexity of propagation media or operational errors during seismic acquisition. It will be challenging to process acquired data if these incoherencies are not compensated for. In mountainous seismic acquisition projects, displacement of the source is one of the more common causes of errors. Such displacement could be happened for receiver points as well, due to the access or operational difficulties in seismic acquisition. In the processing stage, there are some methods for improving coherency based on the assumption that incoherencies are stationary both in time and offset. In particular, it is assumed that all reflection events shifts are static in the time domain and predictable in the offset domain. Thus, they can be compensated by conventional static and dynamic corrections. Nevertheless, there are some violent circumstances where the shifts will no longer be predictable. The displacement of source or receiver stations without resurveying of them and the presence of velocity anomalies in wave propagation media are some examples. These often occur simultaneously in mountainous seismic terrain. Conventional static and dynamic corrections cannot properly rectify such non-stationary inconsistencies in the mentioned circumstances. Although applying the residual static correction to compensate for such incoherencies can improve coherency for some reflector’s events, especially those with good amplitude and frequency content, for the others it can actually make it worse, especially for deep reflectors. For precise seismic reflection imaging, the magnitude of non-stationary shifts plays a key role. Small shifts will result in a reduction of the frequency content of the final stack section. For bigger size of these shifts, the quality of stacked reflections will be reduced and then can be eliminated, consequently. As a well-known fact, in seismic operations, logically increasing frequency content in order to get a better resolution usually involves spending significant time and money. However, with the mentioned operational errors, this is essentially wasteful. To avoid such operational errors, the activities of different crews of the seismic project should be thoroughly checked, in particular, the survey and drilling crews for the accuracy of elevation and coordinates of the shot points. Using both synthetic and real data, this paper attempted to explain how reflection event incoherencies frequently occur during mountainous seismic acquisition, and then proposed an algorithm for compensating those incoherencies with a non-stationary time shift correction in pre-stack seismic data.}, keywords = {mountainous seismic operation,operational errors,incoherency of reflection events,non-stationary time shifts,velocity anomalies,residual static}, title_fa = {خطاهای ناشی از جابه‌جایی کنترل‌نشده چشمه و گیرنده، چالشی برای پردازش داده‌های لرزه‌ای کوهستان}, abstract_fa = {همدوسی در رویدادهای بازتابی موجود در داده‌های لرزه‌ای پیش از برانبارش، عاملی تعیین­کننده در کیفیت نهایی تصویرسازی زیرسطحی با این داده‌ها محسوب می‌شود. این همدوسی به نسبت پیچیدگی محیط انتشار موج و خطاهای عملیاتی در مرحله برداشت داده‌های لرزه‌ای کاهش می‌یابد که در صورت جبران نشدن اثر آنها، پردازش داده‌های لرزه‌ای را با چالش جدی مواجه خواهد کرد. یکی از خطاهای رایج در برداشت داده‌های لرزه‌ای مناطق کوهستانی، جابه‌جایی بدون ثبت مجدد ایستگاه‌های چشمه لرزه‌ای به دلیل محدودیت‌های عملیاتی است. با توجه به میزان سختی عملیات برداشت، احتمال وقوع این نوع خطا در ایستگاه‌های گیرنده نیز وجود دارد. در صنعت، روش‌هایی برای افزایش همدوسی رویدادهای بازتابی وجود دارد که فرض اولیه آنها، ایستایی ناهمدوسی‌های موجود در بعد زمان و پیش‌بینی­پذیری آنها در بعد دورافت و در نتیجه، توانایی جبران آنها با روش‌های تصحیح استاتیک و دینامیک متداول است، اما برخی خطاهای عملیاتی و پیچیدگی­های محیط انتشار موج، موارد نقضی هستند که می‌توانند آن جابه‌جایی­ها را از حالت پیش‌بینی‌پذیری خارج کنند. جابه‌جایی­های بدون ثبت مجدد چشمه یا گیرنده موج لرزه‌ای و وجود بی‌هنجاری‌های سرعت محلی در مسیر انتشار امواج لرزه‌ای، که معمولاً در لرزه‌نگاری کوهستان با هم رخ می‌دهند، از جمله این موارد هستند. اثر این گونه عوامل ناهمدوس­ساز در داده‌ها و استفاده از روابط رایج تصحیح استاتیک و دینامیک برای آنها، می‌تواند جابه‌جایی­های ناایستا در بعد زمان و پیش‌بینی­ناپذیر در بعد مکان ایجاد ‌کند. در این شرایط تصحیحات استاتیک و دینامیک متداول کارایی لازم را برای جبران ناهمدوسی­‌های رویدادهای بازتابی ندارند. این مقاله با تحلیل برخی داده‌های مصنوعی و واقعی سعی در تبیین موضوع دارد و پیشنهاد می­کند از یک روش تصحیح جابه‌جایی زمانی ناپایا در داده‌های لرزه‌ای پیش از برانبارش برای جبران این ناهمدوسی­ها استفاده شود.}, keywords_fa = {عملیات لرزه‌نگاری کوهستان,خطاهای عملیاتی,ناهمدوسی رویدادهای بازتابی,جابه‌جایی زمانی ناپایا,بی‌هنجاری‌های‌سرعت,‌‌ استاتیک‌باقیمانده}, url = {https://www.ijgeophysics.ir/article_153323.html}, eprint = {https://www.ijgeophysics.ir/article_153323_2e4e2a0341d0fb76762993de754fb97b.pdf} }