@article { author = {Golmohammadi, Abass and Haidarian Sahahri, Mohammad Reza and Mazaheri, Seyed Ahmad and Rahimi, Behnam and Karimpour, Mohammad Hassan}, title = {Interpretation of the magnetic anomalies of the western mines of Sangan Ironstone using geology and borehole data}, journal = {Iranian Journal of Geophysics}, volume = {11}, number = {2}, pages = {87-109}, year = {2017}, publisher = {Iranian Geophysical Society}, issn = {2008-0336}, eissn = {2783-168X}, doi = {}, abstract = {Sangan iron deposit is a magnetite iron skarn. Magnetometry is the most common method for the exploration of such kinds of deposits based on the magnetic properties of these minerals. This method specifies the depth, dip, shape, and strike of the sources causing the anomaly. Many explorations of this ilk have been done of which giant Gol e Gohar in Iran is an example. Based on geology and following magnetometry, a massive iron deposit was predicted during Sangan iron exploration, where 558 boreholes in 50×50 m net were designed and drilled in the west ore body, revealing very useful subsurface information. Intrusive bodies are mainly granitic and oxidant types which, because of the presence of fine grain and disseminated magnetite, have higher magnetic susceptibility (K) in comparison to other granites. These bodies are considered as source rocks for the creation of gigantic Sangan mines. Multiphase ground magnetic survey points (19376) with different specifications were equalized and interpreted in this study. The causative sources of most magnetic anomalies in the rotation to the pole (RTP) map were magnetite mineralization, confirmed by the drilling data. In this research, filters of first vertical gradient and upward continuation were used to guide drilling owing to the presence of the remnant magnetism in the magnetite skarn and the unavailability of such measurements that are necessary for specifying the accurate depth of the magnetic anomaly sources. The information pertaining to vertical gradient and upward continued maps correlated well with the depth obtained from drilling and 3D block modelling. The amount of ore reserve and its depth increased from the western anomaly (A') to the central anomaly (C) and had a dip direction to the east. Such change in the depth of mineralization correlated with upward continued responses which represent the central magnetic anomaly (C) as the deepest anomaly in Sangan iron ore deposit. Magnetic responses of the Upward continuation to 1000 m of this magnetic anomaly can be related to either the high depth of the mineralization (620 m drilled so far) or the deeper intrusive body which needed deeper drilling (more than 1000 m) for confirmation.}, keywords = {Sangan iron ore mine,magnetometry,Anomaly,borehole drilling,RTP,filters}, title_fa = {تفسیر ناهنجاری‌های مغناطیسی معادن غربی سنگ آهن سنگان با استفاده از اطلاعات زمین‌شناسی و گمانه‌ها}, abstract_fa = {معدن آهن سنگان یک کانسار آهن اسکارن مگنتیتی است. بهترین روش متداول جهت اکتشاف این مدل کانسارها با توجه به وجود خاصیت مغناطیسی درآنها، روش مغناطیس سنجی است. بر اساس این روش می‌توان اطلاعاتی درباره عمق، شیب، شکل و امتداد منبع ایجادکننده ناهنجاری به‌دست آورد. اکتشافات زیادی از این‌گونه ذخایر در سطح دنیا با استفاده از روش مغناطیس‌سنجی صورت گرفته است که نمونه آن ذخایر بزرگ گل گهر در ایران است. بر مبنای مغناطیس‌سنجی و زمین‌شناسی، وجود ذخیره‌ای عظیم در طی اکتشاف آهن سنگان پیش‌بینی شده است. حفر 558 گمانه در قسمت غربی با شبکه 50 در 50 متر با استناد به داده‌های مغناطیس‌سنجی و زمین‌شناسی سطحی، طراحی شده و پس از حفاری، داده‌های زیرسطحی خیلی مفیدی به‌دست آمده است. بیشتر توده‌های نفوذی گرانیتی و از نوع تیپ اکسیدان هستند که به دلیل وجود کانی‌های ریز و پراکنده مگنتیت داخل آن‌ها، پذیرفتاری مغناطیسی بیشتری از سایر گرانیت‌ها دارند. این‌ها به‌عنوان سنگ منشأ ایجادکننده توده عظیم معدنی سنگان لحاظ شده‌اند. تعداد 19376 نقطه مغناطیس‌سنجی زمینی با مشخصات مختلف برداشت‌شده در چند مرحله اکتشافی در این مطالعه یکسان‌سازی و تفسیر شده است. منابع ایجادکننده اکثر ناهنجاری‌های مغناطیسی نقشه برگردان به قطب(RTP) کانی‌سازی مگنتیت است که داده‌های حفاری آن را تأیید می‌کند. با توجه به وجود مغناطیس باقیمانده در اسکارن مگنتیتی و نبود چنین اندازه‌گیری‌هایی و از طرف دیگر لازم بودن آن در تعیین صحیح عمق منابع ناهنجاری‌های مغناطیسی با مدل‌سازی معکوس یا پیشرو، از فیلترهای مشتق اول قائم و فراسو برای هدایت حفاری در این مطالعه استفاده شده است. اطلاعات عمقی مربوط به منبع ناهنجاری‌ها در نقشه‌های گرادیان عمودی و فراسو با عمق حاصل از حفاری و مدل‌سازی بلوکی هم‌خوانی خوبی دارند. مقدار ذخیره کانسار و عمق آن از ناهنجاری غربی(A') تا ناهنجاری مرکزی(C) در حال افزایش بوده و شیب آن به سمت شرق است. این تغییر عمق کانی‌سازی با پاسخ عمقی نقشه‌های فراسو مبنی بر معرفی ناهنجاری مرکزی(C) به‌عنوان عمیق‌ترین بخش کانسار سنگان هماهنگی دارد. پاسخ مغناطیسی در نقشه فراسوی 1000 متر در محل ناهنجاری مذکور  می‌تواند مربوط به عمق زیاد کانی‌سازی (تا 620 متر حفاری‌شده در حال حاضر) یا توده نفوذی عمیق‌تر در این محل باشد که تأیید آن به حفاری عمیق (بیش از 1000 متر) نیاز دارد.}, keywords_fa = {برگردان به قطب,حفاری مغزه‌گیری,فیلترها,معدن آهن سنگان,مغناطیس‌سنجی,ناهنجاری}, url = {https://www.ijgeophysics.ir/article_49950.html}, eprint = {https://www.ijgeophysics.ir/article_49950_61332ced833cf727bb1cef9c5b7e6600.pdf} }