A New Approach for Datum Transformation Based on Ellipsoidal Approximation and Simultaneous Estimation of the Height Correcting Surface Parameters

Document Type : Research Article

Authors

1 Associate Professor, School of Surveying and Geospatial Engineering, college of Engineering, University of Tehran, Iran

2 MSc student of Geodesy, School of Surveying and Geospatial Engineering, college of Engineering, University of Tehran,Iran

Abstract

The problem of datum transformation; determination of parameters for transferring curvilinear coordinate from one ellipsoid to another, is one of the main problems in geometrical geodesy. The problem draws the attentions of many researchers due to its role in the integration of all types of data in the geospatial database framework. Although the problem is one of the oldest geometrical problems by its nature, it is still challenging because of the newly introduced Earth gravitational models and precise global coordinate measurements using the global positioning systems. Different methods have been introduced by many famous geodesists like Molodensky (1962), Vanicek (1986) and others.
    In this paper, we developed a full mathematical model for determination of datum transformation parameters based on ellipsoidal approximation. It is theoretically and numerically compared with the previously developed model with spherical approximation. For small area, both models lead to the same accuracy while we expect to achieve higher with the ellipsoidal approximation in wider area.
    Moreover, lack of ellipsoidal height in the old data sets is one of the main obstacles for the implementation of the classical transformation schemes. Herein, we introduced two methods for solving this problem. The Earth Gravitational Models (EGMs) which were wieldy available in the new century, thanks to the Earth gravity field’s dedicated missions, were employed to get an estimate of the geoidal heights of the data point with enough accuracy. Alternatively, the idea of the widely used polynomial approximating correcting surface was considered to model the geoid height at the area of computation. The numerical results showed that the second alternative was most helpful. Higher accuracy and better fitness in terms of statistical goodness of fit criteria were the outcomes of the implementation of the polynomial approximating correcting surface.
    In order to show the performance of the ellipsoidal approximation as well as the idea of polynomial correcting surface, 150 points were selected in the Nigeria. The curvilinear coordinates of the data points were given both in the CLARCK-1880 (local old coordinates) and the World Geodetic System 1984 (WGS84) as the global new coordinates. The old coordinates of the data points were geodetic latitudes, geodetic longitudes and orthometric heights where the new coordinate set is fully geodetic components. A quadratic polynomial mathematical model was employed to approximate the geoid surface in the country. The achieved results showed its reasonable accuracy.

Keywords

Main Subjects

References

Badekas, J., 1969, Investigations related to the establishment of a world geodetic system: Ohio State University, 8, 181 pp.
Bursa, M, 1962, The theory for the determination of the non-parallelism of the minor axis of the reference ellipsoid and the inertial polar axis of the Earth, and the planes of the initial astronomic and geodetic meridians from the observation of artificial Earth satellites: Studia Geophysica et Geodaetica, 6, 209-214.
Deakin, R. E., 2004, The standard and abridged Molodensky coordinate transformation formulae: Department of Mathematical and Geospatial Sciences, RMIT University, 1-21.
Molodensky M., Eremeev V. and Yurkina M., 1962, Methods for study of the external gravitational field and figure of the earth, Technical notes, Moscow.
Orupabo, S., Opuaji, T. A., and Adekunle, I. A., 2014, 50-Points data for deriving transformation parameters of geodetic data in Nigeria: Indian Journal of Scientific Research and Technology, 2, 97-101.
Vanicek, P., and Krakiwsky, E. J., 1986, Geodesy: The Concepts: Elsevier.
Wolf, H., 1963, Geometric connection and re-orientation of three-dimensional triangulation nets: Bulletin Géodésique, 68, 165-169.
Závoti, J., and Kalmár, J., 2016, A comparison of different solutions of the Bursa–Wolf model and of the 3D, 7-parameter datum transformation: Acta Geodaetica et Geophysica, 51, 245-256.
Iranian Journal of Geophysics
Volume 14, Issue 2
August 2020
Pages 49-61

Files

Share

How to cite

Statistics