Ajayi, L., and Balogun, L. (1990). Penetration testing in tropical lateritic and residual soils-Nigerian experience: Proc 1st International Symposium on Penetration Testing, ISOPT-1, Orlando, 20–24 March 1988V1, P315–328. Rotterdam: AA Balkema, 1988. Paper presented at the International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts.
Alam, M. J., Shaha, N. R., and Shohug, M. K., 2015, Relationship between standard penetration resistance and strength-compressibility parameters of clay, Journal of civil engineering (IEB), 43(2), 115-131.
Association, J. R. 1990. Specifications for highway bridges. In (Vol. part IV).
Bashar, A. 2000. Geotechnical characterization of Dhaka metropolitan area. (Master). Master's thesis, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh.
Bowles, J. E., 1988, Foundation Analysis and Design, Singapore: Me Graw-Hill Intemational Editions,.
Brown, T., and Hettiarachchi, H. (2008). Estimating shear strength properties of soils using SPT blow counts: An energy balance approach. In GeoCongress 2008: Characterization, Monitoring, and Modeling of GeoSystems (pp. 364-371).
Chen, J.-R., 2004, Axial behavior of drilled shafts in gravelly soils,(Vol, 1): Cornell University, Jan.
Ching, J., Lin, G.-H., Chen, J.-R., and Phoon, K.-K., 2016, Transformation models for effective friction angle and relative density calibrated based on generic database of coarse-grained soils, Canadian Geotechnical Journal, 54(4), 481-501.
Dalai, S., and Patra, C. (2021). Prediction of angle of internal friction based on SPT N values. Paper presented at the Proceedings of the Indian Geotechnical Conference 2019: IGC-2019 Volume V.
De Mello, V. F. (1971). The standard penetration test. Paper presented at the Proc. 4th Pan American Conf. on SMFE.
Decourt, L. (1989). The standard penetration test, state-of-the-art report. Paper presented at the Proc. 12th ICSMFE, Rio De Janeiro.
Dunham, J. W. (1954). Pile foundations for buildings. Paper presented at the Proc. of the ASCE.
Edil, T. B., Benson, C. H., Li, L., Mickelson, D. M., and Camargo, F. F. 2009. Comparison of basic laboratory test results with more sophisticated laboratory and in-situ tests methods on soils in southeastern Wisconsin. Retrieved from
Esmaeilzadeh, H., Shooshpasha, I., and Ghazavi, M. 2012. Estimating internal friction angle of soil using standard penetration test data (a case study in Babolsar). Paper presented at the 9th International Congress on Civil Engineering, Isfahan, Iran.
Fattah, M. Y., Baqir, H. H., and Al-Rawi, O. F. (2006). Field and laboratory evaluation of a soft clay southern Iraq. Paper presented at the Proceeding of the 4th Jordanian Civil Engineering Conference.
Ferdous, S. 2007. Geotechnical characterization of the subsoil in Khulna city corporation (KCC) area. (Master). Bangladesh University,
Handbook, S. a. F., 2012: State of Florida, Department of Transportation.
Hara, A., OHTA, T., NIWA, M., TANAKA, S., and BANNO, T., 1974, Shear modulus and shear strength of cohesive soils, Soils and foundations, 14(3), 1-12.
Hatanaka, M., and Uchida, A., 1996, Empirical correlation between penetration resistance and internal friction angle of sandy soils, Soils and foundations, 36(4), 1-9.
Hatanaka, M., Uchida, A., Kakurai, M., and Aoki, M., 1998, A consideration on the relationship between SPT N-value and internal friction angle of sandy soils, Journal of Structural Construction Engineering, Architectural Institute of Japan, Tokyo(506), 125-129.
Hettiarachchi, H., and Brown, T., 2009, Use of SPT blow counts to estimate shear strength properties of soils: energy balance approach, Journal of geotechnical and geoenvironmental engineering, 135(6), 830-834.
Hossain, A., Alam, T., Barua, S., and Rahman, M., 2022, Estimation of shear strength parameter of silty sand from SPT-N60 using machine learning models, Geomechanics and Geoengineering, 17(6), 1812-1827.
Hossain, M. M., Sultana, N., and Malo, R. C., 2020, Correlations between CPT, SPT and Soil Parameters for Khulna, Bangladesh, India: MAT Journals Pvt. Ltd.
İyisan, R., and Ansal, A., 1990, SPT-N darbe sayıları ile kayma mukavemeti ilişkisi, Zemin Mekaniği ve Temel Mühendisliği Üçüncü Ulusal Kongresi, Boğaziçi Üniversitesi, İstanbul, Ekim, 1990, 303-314.
Jabaji, D., and Saleh, K., 1992, National code of foundation and retaining wall, Jordan National Construction Council.
Jabaji, D., Saleh, K., and Ajouri, M., 1990, National code of site investigation, Jordan National Construction Council.
Kalantary, F., Ardalan, H., and Nariman-Zadeh, N., 2009, An investigation on the Su–NSPT correlation using GMDH type neural networks and genetic algorithms, Engineering geology, 104(1-2), 144-155.
Kitazawa, G., Takeyama, K., Suzuki, K., Oh-kawara, H., and Oh-saki, Y., 1959, Tokyo ground map, Gihodo, Tokyo.
Kulhawy, F. H., and Mayne, P. W. 1990. Manual on estimating soil properties for foundation design. Retrieved from
Kumar, R., Bhargava, K., and Choudhury, D., 2016, Estimation of Engineering Properties of Soils from Field SPT Using Random Number Generation, INAE Letters, 1(3-4), 77-84.
Mahmoud, M. A. A. N., 2013, Reliability of using standard penetration test (SPT) in predicting properties of silty clay with sand soil, International Journal of Civil & Structural Engineering, 3(3), 545-556.
MAKOTO, K., and KHANG, T. T., 2013, Relationships between N value and parameters of ground strength in the South of Vietnam, Geotechnics for Sustainable Development - Geotec Hanoi.
Mayne, P. W. (2001). Stress-strain-strength-flow parameters from enhanced in-situ tests. Paper presented at the Proc. Int. Conf. on In Situ Measurement of Soil Properties and Case Histories, Bali.
McCarthy, D. F., 1977, Essentials of soil mechanics and foundations: Reston Publishing Company Virginia.
Meyerhof, G., 1956, Penetration tests and bearing capacity of cohesionless soils, Journal of the Soil Mechanics and Foundations Division, 82(1), 1-19.
Mikasa, M., 1971, Characteristics of soft deposits in Osaka district, Architecture and Society, Archtectural Association of Japan, 52(9), 38-42.
Mujtaba, H., Farooq, K., Sivakugan, N., and Das, B. M., 2018, Evaluation of relative density and friction angle based on SPT-N values, KSCE Journal of Civil Engineering, 22(2), 572-581.
Murthy, V., 1993, Textbook of Soil Mechanics and Foundation Engineering: CBS Publishers & Distributors/Alkem Company (S).
Mutman, U., and Karadeniz, M. 2016. Standart Penetration Test Correlation for Kocaeli, Turkey. Paper presented at the International Conference on Engineering and Natural Science, Sarajevo.
Nassaji, F., and Kalantari, B., 2011, SPT capability to estimate undrained shear strength of fine-grained soils of Tehran, Iran, Electronic Journal of Geotechnical Engineering, 16, 1229-1238.
NAVFAC, 1986, Soil mechanics, design manual 7.01: Naval Facilities Engineering Command Alexandria, Va.
Nixon, I. K. (1982). Standard penetration test: state of the art report. Paper presented at the Proceedings of the 2nd European Symposium on penetration testing, Amsterdam.
Peck, R. B., Hanson, W. E., and Thornburn, T. H., 1974, Foundation engineering,(Vol, 10): Wiley New York.
Puri, N., Prasad, H. D., and Jain, A., 2018, Prediction of geotechnical parameters using machine learning techniques, Procedia Computer Science, 125, 509-517.
Salari, P., Lashkaripour, G., and Ghafoori, M., 2015, Presentation of Empirical Equations for Estimating Internal Friction Angle of SP and SC Soils in Mashhad, Iran Using Standard Penetration and Direct Shear Tests and Comparison with Previous Equations, International Journal of Geography and Geology, 4(5), 89.
Sanglerat, G., 1972, Developments in Geotechnical Engineering, The penetrometer and soil exploration, 1.
Schmertmann, J. H. (1975). Measurement of in situ shear strength, SOA Report. Paper presented at the Proceedings, ASCE Spec. Conference on In Situ Measurement of Soil Properties, Raleigh, NC, 1975.
Schnaid, F., Odebrecht, E., Rocha, M. M., and de Paula Bernardes, G., 2009, Prediction of soil properties from the concepts of energy transfer in dynamic penetration tests, Journal of geotechnical and geoenvironmental engineering, 135(8), 1092-1100.
Serajuddin, M., and Chowdhury, M., 1996, Correlation between standard penetration resistance and unconfined compressive strength of bangladesh cohesive deposits, Journal of Civil Engineering. The Institution of Engineers, Bangladesh. Vol CE, 24, 69-83.
Shaha, N. R. 2013. Relationship between penetration resistance and strength compressibility characteristics of soil. (Master). Bangladesh University of Engineering and Technology, Dhaka, Bangladesh.
Shioi, Y., and Fukui, J. (1982). Application of N-value to design of foundations in Japan. Paper presented at the Proceeding of the second European symposium on penetration testing.
Singh, N. B., Jibonchand, N., and Devi, K. R., 2017, Applicability of standard Penetration Tests to estimate undrained sheer strength of soils of Imphal, International Journal of Engineering, Technology, Science and Research March.
Sivrikaya, O., 2009, Comparison of artificial neural networks models with correlative works on undrained shear strength, Eurasian Soil Science, 42(13), 1487.
Sivrikaya, O., and Toğrol, E. (2002). Relations between SPT-N and qu. Paper presented at the 5th international congress on advances in civil engineering.
Sivrikaya, O., and Toğrol, E., 2006, Determination of undrained strength of fine-grained soils by means of SPT and its application in Turkey, Engineering geology, 86(1), 52-69.
Sowers, G. B., 1979, Introductory soil mechanics and foundations,(Vol, 72): Macmillan.
Stroud, M. (1974). The standard penetration test in insensitive clays and soft rocks. Paper presented at the Proceedings of the 1st European Symposium on Penetration Testing, Stockholm, Sweden.
Stroud, M. (1988). The SPT: Application and interpretation. Paper presented at the Proc. Conf. Pen Testing, Birmingham.
Terzaghi, K., and Peck, R. B., 1967, Soil mechanics in engineering pratice, 2nd ed.: Wiley, New York.
Terzaghi, K., Peck, R. B., and Mesri, G., 1996, Soil mechanics in engineering practice: John Wiley & Sons.
Wolff, T. F. (1989). Pile capacity prediction using parameter functions. Paper presented at the Predicted and Observed Axial Behavior of Piles: Results of a Pile Prediction Symposium.
Yanase, S., 1969, Soundings in the alluvial clay stratums (On the results of several methods), Report of the Port and Hobour Research Institute, 8(1), 37-58.
Yusof, N., and Zabidi, H. (2018). Reliability of Using Standard Penetration Test (SPT) in Predicting Properties of Soil. Paper presented at the Journal of Physics: Conference Series.
Zekkos, D., Bray, J., and Der Kiureghian, A. (2004). Reliability of shallow foundation design using the standard penetration test. Paper presented at the Proceedings ISC-2 on Geotechnical and Geophysical Site Characterization.
