Estimation of elastic moduli based on Pre-stack simultaneous inversion of an oil field in the Persian Gulf

نوع مقاله : مقاله پژوهشی‌

نویسندگان

1 Ms.c Student of Geophysics, Faculty of Earth Sciences, Kharazmi University, Tehran, Iran

2 Assistant Professor of Geophysics, Faculty of Earth Sciences, Kharazmi University, Tehran, Iran

3 Ms.c Graduate of Geophysics, Faculty of Earth Sciences, Kharazmi University, Tehran, Iran

چکیده

Proper utilization of 3D seismic data in the upstream oil industry is one of the crucial steps in field developments. Many attributes are used to obtain models of facies distribution in a reservoir. Using prestack inversion methods on 3D seismic data and extracting prestack attributes such as elastic properties play very important roles in precise estimation of reservoir properties. The results of prestack seismic inversion in the oil reservoirs are investigated in this study. Simultaneous prestack inversion provides more details of acoustic impedance section rather than the poststack inversion. Moreover, the compressional acoustic impedance extracted from simultaneous inversion is more accurate than the one obtained from poststack inversion. In addition to the compressive acoustic impedance, shear impedance and density, the elastic parameters can be extracted from simultaneously prestack inversion. The purpose of this research is to transform the prestack inversion products into the geomechanical parameters including Young’s modulus and Poisson’s ratio. Young’s modulus and Poisson's ratio have been used in geophysical algorithms to detect the well drilling trajectory and estimate the stress direction. These parameters can also be used in fluid detection studies.

کلیدواژه‌ها

موضوعات

عنوان مقاله [English]

Estimation of elastic moduli based on Pre-stack simultaneous inversion of an oil field in the Persian Gulf

نویسندگان [English]

  • Vahid Kameli Nia 1
  • Ali Misaghi 2
  • Yasser Basati 3
1 Ms.c Student of Geophysics, Faculty of Earth Sciences, Kharazmi University, Tehran, Iran
2 Assistant Professor of Geophysics, Faculty of Earth Sciences, Kharazmi University, Tehran, Iran
3 Ms.c Graduate of Geophysics, Faculty of Earth Sciences, Kharazmi University, Tehran, Iran
چکیده [English]

Proper utilization of 3D seismic data in the upstream oil industry is one of the crucial steps in field developments. Many attributes are used to obtain models of facies distribution in a reservoir. Using prestack inversion methods on 3D seismic data and extracting prestack attributes such as elastic properties play very important roles in precise estimation of reservoir properties. The results of prestack seismic inversion in the oil reservoirs are investigated in this study. Simultaneous prestack inversion provides more details of acoustic impedance section rather than the poststack inversion. Moreover, the compressional acoustic impedance extracted from simultaneous inversion is more accurate than the one obtained from poststack inversion. In addition to the compressive acoustic impedance, shear impedance and density, the elastic parameters can be extracted from simultaneously prestack inversion. The purpose of this research is to transform the prestack inversion products into the geomechanical parameters including Young’s modulus and Poisson’s ratio. Young’s modulus and Poisson's ratio have been used in geophysical algorithms to detect the well drilling trajectory and estimate the stress direction. These parameters can also be used in fluid detection studies.

کلیدواژه‌ها [English]

  • Elastic modulus
  • simultaneous prestack inversion
  • poststack inversion
  • acoustic impedance

مراجع

Ahmed, Z., 2014, Pre-stack simultaneous inversion of 3D seismic data for velocity attributes to delineate channel sand reservoir: International Journal of Emerging Technology and Advanced Engineering, 4, 69–78.
Aki, K., and Richards, P. G, 2002, Quantitative seismology.
Eaton, B. A., 1975, The equation for geopressure prediction from well logs: in Fall meeting of the Society of Petroleum Engineers of AIME, Society of Petroleum Engineers.‏
Fatti, J. L., Smith, G. C., Vail, P. J., Strauss, P. J., and Levitt, P. R., 1994, Detection of gas in sandstone reservoirs using AVO analysis: a 3D seismic case history using the geostack technique: Geophysics, 59 1362–1376.
Gardner, G. H. F., Gardner, L. W., and Gregory, A. R., 1974, Formation velocity and density—The diagnostic basics for stratigraphic traps: Geophysics, 39(6), 770-780.‏
Hampson, D. P., Russell, B. H., and Bankhead, B., 2005, Simultaneous inversion of prestack seismic data: SEG Technical Program Expanded Abstracts 2005, Society of Exploration Geophysicists, 1633-1637.
Kidambi, T., & Kumar, G. S., 2016, Mechanical earth modeling for a vertical well drilled in a naturally fractured tight carbonate gas reservoir in the Persian Gulf. Journal of Petroleum Science and Engineering, 141, 38-51.‏
Moghanloo, H. G., Riahi, M. A., and Bagheri, M., 2018, Application of simultaneous prestack inversion in reservoir facies identification: J. Geophys. En., 15(4), 1376–1388, doi 10.1088/1742-2140/aab249.
Perez, R., 2010, Application of LMR inversion and clustering analysis in the Barnett Shale: 80th Annual International Meeting, SEG, Expanded Abstracts, 2236–2239.
Perez, R., 2014, Brittleness estimation from seismic measurements in unconventional reservoirs: Application to the Barnett shale, Proquest, 2014.
Plumb, R., Edwards, S., Pidcock, G., Lee, D., and Stacey, B., 2000, The mechanical earth model concept and its application to high-risk well construction projects: IADC/SPE Drilling Conference, Society of Petroleum Engineers.‏
Rickman, R., Mullen, M. J., Petre, J. E., Grieser, W. V., and Kundert, D., 2008, A practical use of shale petrophysics for stimulation design optimization: All shale plays are not clones of the Barnett Shale: SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers.
Sharma, R. K., and Chopra, S., 2012, New attribute for determination of lithology and brittleness: 82nd Annual International Meeting, SEG, Expanded Abstracts, doi 10.1190/segam2012-1389.1.
Sumanta, R., Rosid, M. S., and Adrianto, R. D., 2018, Characterization sandstones reservoir using simultaneous inversion method in Sungai Lilin field: AIP Conference Proceedings, 2023(1), 020255, AIP Publishing LLC. ‏‏
Xiang, L. M., and Lubis, L. A., 2017, Application of simultaneous inversion characterizing reservoir properties in X field, Sabah Basin: IOP Conference Series: Earth and Environmental Science, 88(1), 012022, IOP Publishing.‏
Zoback, M. D., 2010, Reservoir Geomechanics: Cambridge University Press.‏
Ødegaard, E. R. I. K., and Avseth, P., 2003, Interpretation of elastic inversion results using rock physics templates: 65th EAGE Conference and Exhibition, cp-6, European Association of Geoscientists and Engineers.‏
مجله ژئوفیزیک ایران
دوره 15، شماره 4
اسفند 1400
صفحه 89-100

فایل ها

هم رسانی

ارجاع به این مقاله

آمار